Pond Lining using Pond liner / Geomembrane

Water is one of the most basic human needs and is one of the most important natural resources. All forms of life are dependent on it. There is scarcity of water resources and water is becoming more costly. It is therefore, very essential to properly conserve and manage this natural resource and regulate its use to obtain maximum benefits.


Excavated pond

The major portion of stored water in an excavated pond is lost due to seepage. The requirement to provide a barrier against high rates of water seepage loss is already a reality in the way of pond lining method. Lining the ponds by installing PVC coated synthetic fabric liner or Multilayer Co-Extruded film Geomembrane or HDPE liner has proved to be an effective seepage proof and an economical solution.


Water retention

A pond liner is a waterproof geomembrane used for water retention, including the lining of farm ponds, water storage ponds, garden ponds, Spirulina raceways, Pearl farming Ponds, golf course ponds, rain water harvesting ponds, fish farming ponds and water reservoirs. Pond liners need to be protected from sharp objects (for example, stones) below the liner. Protection can be provided with a layer of fine sand or non woven polyester geotextile fabric or pp geotextile fabric.


Site preparation & Anchoring

After the basin is excavated, the surface of the excavated area should be free from sharp objects. If the surface consists of coarse particles, a layer of fine sand should be spread on top. For anchoring the liner, a trench should be excavated around the pond. The trench allows for the burying of the liner around the perimeter and is usually the easiest and most cost effective way to secure the liner. Liners are installed covering the bottom of the trench and applied towards the basin. After the liner is buried inside the trench the trench is filled with the excavated soil.





Kingstone Geomembrane

KingStone Geomembrane is a polyethylene Reinforced Composite Geomembrane, specifically designed for use in water retention and containment applications. Our Geomembrane specifically designed as barrier of water and gases. The durable, stress crack resistant, lightweight construction of KingStone Geomembrane provides outstanding performance in many different climates and environmental conditions.

UV Stabilised multi layered design provides excellent tear strength, puncture and abrasion resistance and prolonged exposure to sun. Dimensionally stable product ensure your proper contain of water in all weather conditions.

KingStone Geomembrane is ideal for containment applications such as agriculture, aquaculture, mining and energy, secondary containment, wastewater lagoons, and landfill covers. Retention applications include golf course ponds, stormwater management, irrigation storage, canal liners, and potable water reservoirs.

All-weather flexibility -KingStone Geomembrane products maintain pliability and optimal performance in a wide range of temperatures.

Range :

Available in width 12 feet wide or 24 feet wide.
Thickness: 300 microns, 500 microns, 750 microns & 1000 microns

Strongex :

  • High Strength Woven scrim made with iLock and Swiss technology
  • KingStone iLock technology gives excellent tensile and tear strength of Woven fabric.
  • Our technology and blend specially designed for better puncture and abrasion resistance with minimum AOS


  • Coatex :

  • Hi-bond coating has been done using UV and additives along with copolymers blend.
  • Our Coating blends gives excellent resistance of UV, Heat and Ozone rays.
  • All product of Kingstone made without any heavy metal particles and without heavy filler content.
  • 100% Guarantee of Colour fastness


  • Speedex :

  • Our products available in width of 12/24 feet wide.
  • Wide width panels or width always helps to reduce sealing time and sealing cost.
  • Wide width panels helps for reduce chances of leakage & seam failure.
  • 100% Guarantee of ON Time Delivery.


  • Weldex :

  • KingStone made with special additives package which gives superior Heat Seal, Welding Strength either through Hot air weld or Wedge Weld.
  • Weldex Technique helps for faster sealing at Low Temp and resealing of the products.
  • KingStone Products are Plasma / Corona treated to improve the weld strength.


  • CLIMAX HDPE Nonwoven Film

    High Density Polyethylene (HDPE) is the high density version of PE plastic and is harder and denser than the LDPE, but is less ductile, and lighter than water. Climax HDPE Film / Sheet / Liner / Geomembrane has proved to be a boon especially for developing countries like India by playing an important role to prevent the air and groundwater pollution. The best thing is that it can be easily moulded and welded together and the use of UV Stabilizers improves its weather resistance. High Density Polyethylene Geomembrane lives up to the expectations which are demanded in today's world of environmental engineering. Climax HDPE's prime motive is to keep the Nature clean.

    Ideal for Water harvesting & conservation, Canals & Reservoirs, Field channels, Salt pans, Aquaculture, Agricultural water management, Converters, Sewage treatment facilities, Waste disposal sites, Subterranean structures, Road works, Runways, Construction sites as well as Solid waste management.

    Range :

    300 Microns (400 Gauge/ 0.1 mm) to 2000 Microns (8000 Gauge /2.0 mm)

    Standards :

    BIS 2508:2016 and IS 10889:2004, GRI GM, ASTM, MOEF, CPCB,

    Products :

    HDPE ( High Density Polyethylene) Sheets, Liners, Films, Geomembranes

    BENEFITS :

    • Maximum use of each rain drop.
    • Highly flexible & high strength.
    • Durable for longer periods.
    • Chemical substances resistant.
    • Puncture resistant
    • Good weatherability.
    • Economical with excellent cost efficiency.
    • Prevents pollution of ground water & water loss.

    FEATURES :

    • U.V. Stabilized.
    • Excellent mechanical properties.
    • Excellent water permeability property.
    • Tensile-impact strength.
    • Tear resistance and flex crack resistance.
    • Environmental stress cracking resistance.
    • Tightly sealed with advanced welding system.